Upper Arm Cuff
Blood Pressure Cuff for digital upper arm blood pressure monitor
Size 22*42cm.
Can easily fit any type of (Adult) body.
Universal digital arm cuff designed to use with any BP Monitoring Digital device.
Description
You should know about how to use. Following is the method and some precautions of how to proper use of digital arm cuff.
1. Pass the end of the cuff (with sewn-in rubber stopper) through the metal stirrup so that a loop is formed. The Velcro closer must be facing outwards.
2. Push the cuff over the left upper arm so that the tube points in the direction of the lower arm and palm.
3. Lay the cuff on the arm as illustrated. Make certain that the lower edge of the cuff lies approximately 1 to 2cm above the elbow and that the rubber tube leaves the cuff on the inner side of the arm.
Important: The blue mark (about 2cm long bar) must lie exactly over the artery which runs down the inner side of the arm.
4. Tighten the free end of the cuff and close the cuff with the closer.
5. There must be no free space between the arm and the cuff as this would influence the result. Clothing must not restrict the arm. Any piece of clothing with gives pullover must be removed or taken off.
6. Secure the cuff with the Velcro closer in such a way that it lies comfortably and is not too tight. Lay the arm on the table so that the cuff is as the same height as the heart. Make sure that the tube is not kinked.
7. Remain seated quietly for two minutes before you begin the measurement.
Note: if it is not possible to fit the on the left arm it can also be placed on the right arm. However all the measurements should be made using the same arm for better cross reference. When measuring, the legs should not be crossed, feet flat on the ground, arms and back vertical. When measuring do not squeeze the hose of the cuff, as this may cause injury or the incorrect measurement.
Reviews
There are no reviews yet.